Monday, June 29, 2009

How do I do that?

I often wonder how many criminalists actually watch cop shows like CSI or NCIS. People often tend to scoff at fiction that pretends to emulate what they know. It’s a question of where the suspension of disbelief kicks in. We look at what the characters are doing and go – “yea right!”

But, liberties aside, I enjoy detective and crime scene fiction, even when the science goes astray. Does the fact that warp drive doesn’t exist make Star Trek less enjoyable? No – and lets be honest, aside from the lighting, is there anyone out there who wouldn’t want Grissom’s lab?

As a product developer, I also have to admit I find a lot of fodder in fiction. While it’s true that the people who produce television forensic television shows or books based on criminalist characters try to add as much authentic science as then can, the pacing of the stories requires some liberties. Sometimes, I see that prop guys have devised easier delivery systems than the original manufacture had. Sometimes the writers have presented “real life” problems for which there is no off the shelf solution. And sometimes, you see a piece of evidence that can only be read by a really cool piece of equipment that most labs couldn’t hope to afford. And I wonder what I would do if confronted with the same problem.

And that I guess is the essence of research science. So, in this blob space, I plan to look at the developing and using of the tools that help us answer the question “how do I do that?”

Uview 414500

We have a great price on the Uview414500 kit. It comes with a 12v UV light, so you just clamp it to the vehicles battery and you are ready to search for the leak. With this light, you never have to buy batteries and you get the power from the light that 12 volts can provide. Of course, the injection gun is a good product and will work well for you. A gun, dye and a light, everything you need!

Here is the 414500 on our site:
http://www.deepdiscountdirect.com/catalog.asp?prodid=629347&showprevnext=1

Sunday, June 28, 2009

Finally, it's hot! Now what

Finally the summer has come to the Midwest. It appears people are turning on the A/C again in their cars. Is it time for a new leak detection gun for you or your shop?

We have a great price on the best gun around, the Bright Solutions A/C Detective. Here it is:

http://www.deepdiscountdirect.com/catalog.asp?prodid=569990

This gun is the best because it does not use a cartridge, it uses a bottle. In addition, it uses a precision injection system. With the A/C detective, you get one application per each squeeze of the trigger. You will get more vehicles out of each bottle, and the bottles are much cheaper than cartridges. Buy one for the whole family!

Monday, June 22, 2009

Hot enough for you? How is your car battery holding up?

Many of us have heard that warm weather is actually harder on car batteries than the cold. It's true!! Depending on where you live, the extreme heat of the summer can be hard on your battery, causing it to wear out and eventually fail. How do you stop from being stranded by a dead battery? Know about it before it happens.

You can do that with Battery Alert. This product will warn you with an audible alarm when a battery is nearing the point when it will not be able to start you car. We have it here at deepdiscountdirect.com at a great price.

Here it is.

http://www.deepdiscountdirect.com/catalog.asp?prodid=571283

Tuesday, June 16, 2009

Father's Day is coming up

What should you get Dad? How about a SK tool set?

Here is a great US made tool set at a great price:

https://secure.cazbah.net/catalog.asp?prodid=594218&showprevnext=1

Be careful when you change your own engine coolant

We have a friend who stops by quite a bit. Our kids are best friends. I noticed the other day how terrible their car sounds. I asked about it and found that it had a leaky radiator and a "friend" replaced it and refilled the coolant. To me, it sounded like air was in the system.

It made me think of the coolant exchange system we have on the site here:

http://www.deepdiscountdirect.com/catalog.asp?prodid=571293

It is IMPERATIVE that you get all air pockets out of the coolant system when you make a coolant exchange. Trying to save a few bucks could cost you an engine. It is always best to take your vehicle to a professional. Of course, I suggested this to our friend.

Friday, June 12, 2009

Neutronics 7-08-1000-51

Imagine this....

You hook your R&R machine up to a vehicle and start the recovery process. Unknown to you, the system is full of sealant. Now you have a multiple thousand dollar machine that is contaminated. Of course, it will take time and $ to get it working again. How do you prevent this?

The Neutronics 7-08-1000-51 . Here it is at a great price:

http://www.deepdiscountdirect.com/catalog.asp?prodid=629340&showprevnext=1

Thursday, June 11, 2009

Uview #580500 AC Analyzer

Are you looking for the Uview AC analyzer, # 580500? We have them here at a great price. Here are some of the features of this product:

Micro-processor instantly determines A/C system performance.
Suspends from hood latch or attaches to your manifold gauge set.
Reads in both Farenheit or Celsius
Ambient and Vent temperature probes (included).
Diagnostic flowchart and Tech-Tip guide (included).Powered by a standard 9V battery (included

If you need to quickly diagnose an AC system, this is the tool to have.

Here it is at a great price:

http://www.deepdiscountdirect.com/catalog.asp?prodid=629385&showprevnext=1

Tuesday, June 9, 2009

Uview # 330500 Hawkeye Injection Kit

Looking for a good deal on the UView Hawkeye Junior Injection kit? Look no further:

http://www.deepdiscountdirect.com/catalog.asp?prodid=629346&showprevnext=1.

A good system at a great price. Feel free to buy several....

Monday, June 8, 2009

Tracer Products Glo-Sticks

Tracer has sold a lot of dye injection systems, including what are commonly called "Glo-Sticks." We have them here at Deepdiscountdirect.com.

Here is their page at Tracer's website:

http://www.tracerline.com/dyesforacr_tracerstick.html

Here they are on our site:

http://www.deepdiscountdirect.com/index.asp?category=20192

The Pro's Hammer Set

Here at deepdiscountdirect.com, we sell the finest hammers in the world, Nupla Hammers. My favorite is the soft face hammer set, #02357. You get a great fiberglass handled hammer and (6) different soft faces for the hammer. You can use the different faces for different jobs. If you wear one out, replace it, not the entire hammer. Priced right and made in the USA. Here it is.


http://www.deepdiscountdirect.com/catalog.asp?prodid=629465&showprevnext=1

Friday, June 5, 2009

Do you have a refrigerant identifier?

Working on A/C systems is not easy. It is complicated, expensive and takes a lot of training. It can also be dangerous. As hard as it is to believe, some people use propane or butane instead of a proper refrigerant to cool their car. What if that car comes into your shop? How can you protect your employees and your equipment? A Neutronics identifier can let you know what is in the customer's A/C system before you start your work.

We have the best price on the Internet. Check it out:

http://www.deepdiscountdirect.com/catalog.asp?prodid=629396&showprevnext=1

Thursday, June 4, 2009

Nupla Hammers are here!

We are happy to be able to offer Nupla hammers on our website. Nupla hammers are made right here in the USA, just outside of Los Angeles.

We have a wide variety of hammers on the site. From non-sparking t0 blacksmith hammers, we have 90 to choose from. Feel free to buy one of each!

Wednesday, June 3, 2009

The new refrigerant, R1234yf

By now, most have heard of the new refrigerant coming to North America, probably in 2011, R1234yf. I expect that we will see it in very limited release in 2011, then a complete rollout in 2012. Many are wondering, will their tools work with R1234yf?

Probably, but it is hard to tell. I am sure that all of the major leak detection and a/c tool companies are working hard to make sure their products will work with the new refrigerant. We will keep you posted with what we find.

If you want to learn more about R1234yf, here is a good article I just read:

http://www.motor.com/article.asp?article_ID=1458

Monday, June 1, 2009

How to choose the correct hammer for a job

When selecting a striking tool for a specific job, we used to call these hammers, three items should be considered: safety, efficiency and collateral damage.
Hammers are perhaps the most widely misused and abused of all hand tools. Many people just get a hammer, the larger the better, and make it fit.

Basic safety measures must be taken when using any type of striking tool. Safety glasses must be used in all cases. The size of the hammer head must be in proportion to the item being struck. The striking face of the hammer should be parallel to the surface of the item being struck.

Example #1
If you are using a hammer to strike another tool, such as a chisel, punch or wedge, you should have a face diameter larger than the face of the struck tool. Use a small (2 or 3 lb) hand drilling hammer when hitting a ½ punch or use the flat surface of a 32 oz ball peen.

Efficiency or speed is also important in choosing the proper striking tool. An undersized hammer can cause a job to go very slow. Also tiring the user.

Example #2
Sledge hammers are generally used is busting concrete or stone. You would most likely want to use a 10-20 lb sledge to do this job. Using an under sized 6 lb sledge could cause this job to take as much as 3 times as long. The length of the handle is also important when choosing a sledge hammer. Sledge hammer come with handle lengths from 14 to 36 inches. Normally long handled sledges are used with two hands when a great deal of striking power is needed.

It is important not to cause collateral damage to adjacent areas when using a striking tool. If you are using a hammer next to areas that can be damaged such as wood panel or tile it is important to use a soft face – dead bow hammer.

Example #3
If you need to use a hammer to move a granitite counter top in place a soft face-dead blow hammer is idea. The soft head surface, normally made of rubber, nylon or urethane will prevent chipping of the granite. The dead blow design will absorb the energy (rebound) so that the hammer does not skip to another surface. The dead-blow also aids in reducing arm stress.